Networking Reference
In-Depth Information
R 2007:C15:C0:10::/64 [120/3]
via FE80::214:6AFF:FEFC:7390, GigabitEthernet0/0
R 2007:C15:C0:11::/64 [120/2]
via FE80::214:6AFF:FEFC:7390, GigabitEthernet0/0
R 2007:C15:C0:12::/64 [120/3]
via FE80::214:6AFF:FEFC:7390, GigabitEthernet0/0
R 2007:C15:C0:13::/64 [120/3]
via FE80::214:6AFF:FEFC:7390, GigabitEthernet0/0
R 2007:C15:C0:14::/64 [120/3]
via FE80::214:6AFF:FEFC:7390, GigabitEthernet0/0
Ensure that the summary route configured previously is not seen back on the routing table of R5. Configure only
R5 to achieve this. (1 point)
As briefly discussed in the previous question, the summary route will return to R5 through the newly created tunnel in-
terface. This is expected behavior because of the method in which it was originally advertised. A simple prefix-list is re-
quired on R5 to deny the summary and permit all other routes entering the tunnel interface. If you have configured this
correctly, as shown in Example 1-36, you have scored 3 points.
EXAMPLE 1-36
R5 Distribute-list Configuration and Verification
R5# show ipv6 route rip
IPv6 Routing Table - 14 entries
Codes: C - Connected, L - Local, S - Static, R - RIP, B -
BGP U - Per-user Static route
I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary
O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
D - EIGRP, EX - EIGRP external
R 2007::/16 [120/8]
via FE80::7864:2D04, Tunnel0
R 2007:C15:C0:10::/64 [120/3]
via FE80::213:7FFF:FE84:BEE0, Serial0/0/1
R 2007:C15:C0:11::/64 [120/2]
via FE80::213:7FFF:FE84:BEE0, Serial0/0/1
R 2007:C15:C0:12::/64 [120/2]
via FE80::213:7FFF:FE84:BEE0, Serial0/0/1
R 2007:C15:C0:13::/64 [120/2]
via FE80::213:7FFF:FE84:BEE0, Serial0/0/1
R 2007:C15:C0:15::/64 [120/3]
 
Search MirCeyron ::




Custom Search